View STGY50NC60WD_1318325.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STGY50NC60WD
N-channel 600V - 50A - Max247 Very fast PowerMESHTM IGBT
PRELIMINARY DATA
General features
Type STGY50NC60WD

VCES 600V
IC VCE(sat) (max)@25C @100C < 2.5V 50A
High frequency operation Low CRES / CIES ratio (no cross-conduction susceptbility) Very soft ultra fast recovery antiparallel diode Max247
2 1 3
Description
Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESHTM IGBTs, with outstanding performances. The suffix "W" identifies a family optimized for very high frequency application.
Internal schematic diagram
Applications

High frequency inverters SMPS and PFC in both hard switch and resonant topologies Motor drivers, UPS
Order codes
Part number STGY50NC60WD Marking GY50NC60WD Package Max247 Packaging Tube
October 2006
Rev 1
1/11
www.st.com 11
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.
Contents
STGY50NC60WD
Contents
1 2 3 4 5 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Test circuit ................................................ 7
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2/11
STGY50NC60WD
Electrical ratings
1
Electrical ratings
Table 1.
Symbol VCES IC(1) IC(1) ICM (2) IF VGE PTOT Tstg Tj
Absolute maximum ratings
Parameter Collector-emitter voltage (VGS = 0) Collector current (continuous) at TC = 25C Collector current (continuous) at TC = 100C Collector current (pulsed) Diode RMS forward current at TC = 25C Gate-emitter voltage Total dissipation at TC = 25C Storage temperature - 55 to 150 Operating junction temperature C Value 600 80 50 190 30 20 260 Unit V A A A A V W
1. Calculated according to the iterative formula:
T -T JMAX C I ( T ) = ----------------------------------------------------------------------------------------------------CC R xV (T , I ) THJ - C CESAT ( MAX ) C C
2. Pulse width limited by max junction temperature
Table 2.
Symbol Rthj-case Rthj-case Rthj-amb TL (1)
Thermal resistance
Parameter Thermal resistance junction-case max IGBT Thermal resistance junction-case max diode Thermal resistance junction-ambient max Maximum lead temperature for soldeing purpose Value 0.48 1.5 50 300 Unit C/W C/W C/W C
1. 1.6mm from case, for 10sec
3/11
Electrical characteristics
STGY50NC60WD
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 3.
Symbol VBR(CES) VCE(sat) VGE(th) ICES IGES gfs
Static
Parameter Collector-emitter breakdown voltage Test conditions IC= 1mA, VGE= 0 Min. 600 1.9 1.7 3.75 2.5 Typ. Max. Unit V V V V A mA nA S
Collector-emitter saturation VGE= 15V, IC= 40A voltage VGE= 15V, IC=40A,Tc=125C Gate threshold voltage Collector cut-off current (VGE = 0) Gate-emitter leakage current (VCE = 0) Forward transconductance VCE= VGE, IC= 250A VGE= Max rating,TC= 25C VGE= Max rating,TC= 125C VGE= 20V , VCE= 0 VCE = 15V, IC= 20A
5.75 250 1 100 20
Table 4.
Symbol Cies Coes Cres Qg Qge Qgc
Dynamic
Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test conditions VCE = 25V, f = 1MHz, VGE = 0 VCE = 390V, IC = 40A, VGE = 15V, Figure 2 Min. Typ. 4700 410 90 155 32.4 82.2 Max. Unit pF pF pF nC nC nC
4/11
STGY50NC60WD
Electrical characteristics
Table 5.
Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(Voff) tf tr(Voff) td(Voff) tf
Switching on/off (inductive load)
Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time Test conditions VCC = 390V, IC = 40A , RG= 10 VGE= 15V, Figure 3 VCC = 390V, IC = 40A , RG= 10 VGE= 15V, Tj = 125C Figure 3 VCC = 390V, IC = 40A RG= 10 VGE= 15V, , Figure 3 VCC = 390V, IC = 40A , RG= 10 VGE= 15V, Tj = 125C Figure 3 Min. Typ. 52 17 2400 50 19 2000 31 240 35 60 280 63 Max. Unit ns ns A/s ns ns A/s ns ns ns ns ns ns
Table 6.
Symbol Eon(1) Eoff(2) Ets Eon(1) Eoff(2) Ets
Switching energy (inductive load)
Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test conditions VCC = 390V, IC = 40A , RG= 10 VGE= 15V, Figure 1 VCC = 390V, IC = 40A RG= 10 VGE= 15V, , Tj = 125C Figure 1 Min. Typ. 365 560 925 635 910 1545 Max. 470 790 1260 Unit J J J J J J
1. Eon is the tun-on losses when a typical diode is used in the test circuit in Figure 4 If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the same temperature (25C and 125C) 2. Turn-off losses include also the tail of the collector current
5/11
Electrical characteristics
STGY50NC60WD
Table 7.
Symbol Vf trr Qrr Irrm trr Qrr Irrm
Collector-emitter diode
Parameter Forward on-voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current Test conditions If = 20A If = 20A, Tj = 125C If = 20A ,VR = 40V, Tj = 25C, di/dt = 100 A/s Figure 4 If = 12A ,VR = 40V, Tj =125C, di/dt = 100A/s Figure 4 Min. Typ. 1.5 1 44 66 3 88 237 5.4 Max. 2.2 Unit V V ns nC A ns nC A
6/11
STGY50NC60WD
Test circuit
3
Figure 1.
Test circuit
Test circuit for inductive load switching Figure 2. Gate charge test circuit
Figure 3.
Switching waveform
Figure 4.
Diode recovery time waveform
7/11
Package mechanical data
STGY50NC60WD
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
8/11
STGY50NC60WD
Package mechanical data
Max247 MECHANICAL DATA
mm MIN. A A1 b b1 b2 c D e E L L1 4.70 2.20 1.00 2.00 3.00 0.40 19.70 5.35 15.30 14.20 3.70 TYP. MAX. 5.30 2.60 1.40 2.40 3.40 0.80 20.30 5.55 15.90 15.20 4.30 MIN. inch TYP. MAX.
DIM.
P025Q
9/11
Revision history
STGY50NC60WD
5
Revision history
Table 8.
Date 09-Oct-2006
Revision history
Revision 1 Initial release. Changes
10/11
STGY50NC60WD
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
11/11

▲Up To Search▲

Price & Availability of STGY50NC60WD

	To Download STGY50NC60WD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .